Electrical Wiring - Garrett CS 5000 User Manual

11.7.7 Secure the unit to the floor using 1/4" (6mm) mounting screws (not supplied). The mounting holes
in the plates may be used as a drill guide.
Caution: Adjust the width of the unit at the bottom of the panels to 30" (762mm) BEFORE
making the holes in the next step.
11.8 ELECTRICAL WIRING REQUIREMENTS
Magnascanner CS 5000 # 11674XX
Comes with a standard American ground power cord. If the plug must be replaced or removed to
hardwire an AC junction box, use the following wiring list:
Green
Black
White
Magnascanner CS 5000 # 11674XX (International)
Comes with a European power cord. If the plug must be replaced or removed to hardwire to an AC
junction box, use the following wiring list:
Green/Yellow
Brown
Blue
©2009 GARRETT METAL DETECTORS
CS 5000
User Manual
To Ground
To Line Hot
To Line Neutral
To Ground
To Line Hot
To Line Neutral
43 PN 1530100 REV H