Table of Contents
Advertisement
OPERATION AND SERVICE INFORMATION
Read all of manual to become familiar with vehicle. Pay attention to all NOTICES, CAUTIONS, WARNINGS and DANGERS.
Check
Clean, Adjust, etc.
To perform service that is listed in this schedule but not described in this manual, contact a local Service Representa-
tive or see the Repair and Service Manual for this vehicle.
NOTE: Some maintenance items must be serviced more frequently on vehicles used under severe driving conditions
DAILY
WEEKLY
TIRES
WHEELS
FUEL GAUGE
ENGINE OIL
COOLING FAN
STARTER/GENERATOR BELT
MONTHLY - 20 HOURS
WIRING
ACCELERATOR
SERVICE BRAKE
(MECHANICAL BRAKES)
PARK BRAKE
CHOKE CABLE
CARBURETOR LINKAGE
DIRECTION SELECTOR
ENGINE
COOLING FAN
STEERING ASSEMBLY
TIE ROD/LINKAGES
REAR AXLE
QUARTERLY - 60 HOURS
FRONT SHOCK ABSORBERS
FRONT AXLE
FRONT SPRINGS
FRONT WHEEL ALIGNMENT
Page 18
PERIODIC SERVICE SCHEDULE
Replace
BEFORE USE:
Check service brake general operation
Check park brake operation - does it hold on a hill.
Check warning device function in reverse
Check tire pressure, condition of tires & rims.
Check smooth operation of accelerator.
Check for loose or missing hardware.
Check Battery - state of charge, condition, loose terminals, corrosion, hold down &
hardware
Check overall vehicle condition
(includes items listed in previous table & the following)
Examine for cuts, excessive wear & pressure (See GENERAL SPECIFICATIONS)
Check for bent rims, missing or loose lug nuts
Check for proper operation (at fueling), and fuel cap vent is free of dirt
Check and add if required - DO NOT OVERFILL
Check for build up of debris inside blower housing & clean if required.
Check for tension, wear, cracks
(includes items listed in previous table & the following)
Check all wiring for loose connections and broken/missing insulation
Check for smooth movement - DO NOT LUBRICATE CABLE
Conduct brake performance test
Check brake performance and adjust if required
Check for smooth movement and adjustment - DO NOT LUBRICATE CABLE
Check attachment, adjust as required
Check attachment, adjust as required
Check for unusual noise, vibration, acceleration, oil leaks
Check for build-up of foreign matter inside blower housing & fins, clean if required
Check for abnormal play, tightness of all hardware
Check for excessive play, bent components or loose connections
Check for leakage, add SAE 30 oil as required
(includes items listed in previous tables & the following)
Check for oil leakage and loose fasteners
Check for damage to axle and loose or missing hardware
Check for loose hardware, cracks at attachments
Check for unusual tire wear, align if required
Fig. 27 Periodic Service Schedule
Advertisement
Table of Contents
