Installation; Prepare Cabinet Opening - Existing Utilities; Disconnect Power; Power Supply Cord - Kenmore 66513292K115 Installation Instructions Manual

INSTALLATION
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
x x ¸ i
_FoIIow instruCtions in the !,Prepare Cabinet
Opening'Existing UtilitieS' ! section,
No
_Follow instructions inthe ,Prepare cabinet
Opening--New Utilities sectionl
INSTRUCTIONS
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach
far enough, follow the instructions in the "Prepare Cabinet
Opening--New Utilities" section.
Prepare and route the electrical supply
Option hv Power Supply Cord=
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
j Power Supply Cord--Drill
Optibnal location
r
,cation
Drill a 1½" (3.8 cm) hole in cabinet side or rear.
See "Product and Cabinet Opening Dimensions" section.