REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
This chart is provided to help you identify the small parts used in assembly. Important: Some parts
may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled. The number in parenthesis below each part refers to the
key number of the part. The second number refers to the quantity needed for assembly.
Please Note: The assembly is divided into five stages: 1) frame assembly, 2) press and butterfly
arm assembly, 3) cable and pulley assembly, 4) seat and backrest assembly, and 5) VKR assem-
bly. The hardware for each stage is packaged separately. Wait until you begin each assembly
stage to open that parts bag.
R1295A