Weider Pro 9510 User Manual page 17

38. Remove the decals from the decal sheet (not shown) and apply them to the home gym system in the loca-
tions shown in the illustration below.
38
HIGH PULLEY
(OTHER SIDE)
VKR
39. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENT, beginning on page 18 of this manual.
Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAM on page 22 of this manual for proper cable routing. If there is any slack in the
cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE-
NANCE on page 21.
17
BUTTERFLY
PRO 9510
BENCH PRESS
PREACHER CURL
LEG DEVELOPER
LOW PULLEY