Product Labeling; Included Items - Invacare 1556922 User Manual

2.4 Product Labeling

Item
1
Tighten top wing knob nuts firmly by hand
2
3
3 Setup

3.1 Included Items

Each kit contains the following items:
1. Top bracket and rail module
2. Vertical pole module (x2)
3. User manual, part number 1183379 (not shown)
4. Hoist*
5. Hanger bar
6. 5 mm Allen key (not shown)
* The Hoist comes with a separate Hoist User Manual (part
number 1183377). Refer to this manual for information on
the safe operation and maintenance of the hoist.
1183379A
Label Text
WARNING
before system usage.
3.2 Inspection
WARNING!
Risk of Injury
Damaged components of the freestanding rail system
could cause injury.
– Inspect the packaging upon receipt.
– If the packaging is damaged, the components of the
freestanding rail system should be carefully checked for
noticeable imperfections, defects or flaws.
– If damage is suspected, DO NOT use or assemble the
freestanding rail system. Contact an Invacare dealer.
3.3 Assembling the Freestanding Rail
For ease of assembly, ensure vertical posts are in their lowest
position. Refer to 3.6 Adjusting the Height, page 5 .
1. Open the legs A of one vertical pole module B.
Raise the vertical pole module B.
2.
3. Lift one end of the top bracket and rail module \C and mount it
on top of the vertical pole module B.
The top bracket must be flush with the mark \G on the
vertical pole.
It will be necessary to tilt the top bracket and rail module
and vertical pole to assemble them.
Lock the top bracket C to the vertical pole B with the locking
4.
arm D.
3