Configuring Upnp On The Mediaaccess Gateway - Technicolor MediaAccess TG789vn Setup And User Manual

9 NETWORK SERVICES

9.1.3 Configuring UPnP on the MediaAccess Gateway

Introduction
On the MediaAccess Gateway GUI
Enable/Disable UPnP.

Enable/Disable

Enable/Disable UPnP
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
 Select the Use UPnP check box, to enable UPnP.
 Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled, only limited UPnP operation between the host and the MediaAccess Gateway is allowed:
A local host is not allowed to connect/disconnect the MediaAccess Gateway Internet connection. You can then only

connect/disconnect the Internet connection via the
Address translation mappings can only be added or changed via UPnP for the host on which the UPnP application is

running.
Extended Security is enabled by default.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
88
you can:
Extended Security.
"Accessing the MediaAccess Gateway GUI" on page
"Accessing the MediaAccess Gateway GUI" on page
37.
MediaAccess Gateway GUI
37.
DMS-CTC-20101206-0033 v1.0