Answering Machine Settings - iDect Link Plus Single User Manual

OR
4. Press <C> to stop memo recording without saving and return back to
ANS. MACHINE menu.
8.5

Answering Machine Settings

You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.5.1 Set the Answer Mode
By default, the answer machine is set in ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
does not allow callers to leave a message. In that case, your callers will be
prompted to call back later.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select ANSWER MODE.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY
5. Press <MENU/OK> to confirm.
When your answering machine memory is full and it is in
answer mode will change to ANSWER ONLY automatically. It will return to
ANS & RECORD mode automatically after some
8.5.2 Record Your Own Outgoing Message (OGM)
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personalised OGM is deleted, the pre-set OGM will be
restored automatically.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER
ONLY.
5. Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.
6. Press <MENU/OK> to start recording your personalised OGM and
"RECORDING"
7. Press <MENU/OK> to stop and save your personalised OGM. Your newly
saved OGM will playback automatically.
Alternatively, press <BACK> to return to previous screen without saving the
personalised OGM.
.
is displayed on the screen.
33
ANS & RECORD
messages have been deleted.
,the