Asus KN97 User Manual page 14

3. Real Time Clock (RTC) RAM (RTCLR)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and unplug your AC power, (2) Move this
jumper to "Clear CMOS," (3) Move the jumper back to "Keep," (4) Turn on
your computer, (5) Hold down <Delete> during bootup and enter BIOS setup to
re-enter user preferences.
RTC RAM
Keep CMOS
Clear CMOS
4. Battery Test (BATTEST)
You can test the battery's current by removing this jumper and attaching a cur-
rent meter the two pins.
WARNING! You must unplug the power cord to your power supply to ensure that
there is no power to your motherboard. The CMOS RAM containing BIOS setup
information may be cleared by this action. You should enter BIOS to "Load Setup
Defaults" and re-enter any user information after removing and reapplying this jumper.
Battery Test
14
III. INSTALLATION
RTCLR
[2-3] (Default)
[1-2] (momentarily)
1 2 3
RTCLR
Keep CMOS
(Default)
BATTEST
Operation
(Default)
ASUS KN97 User's Manual
1 2 3
RTCLR
Clear CMOS
BATTEST
Battery Test