CONNECTING THE MACHINE TO POWER SOURCE
8
Caution: Always make sure that the machine is unplugged from
power source and the main switch is on "O". when the machine is
not in use and before inserting or removing parts.
-
Connect the machine to a power source as illustrated (1/2).
-
To start the machine, press on the foot control (3). The speed of
the machine is regulated by the amount of pressure put on the foot
control.
Attention:
machine to power source. Unplug power cord when machine is not
in use.
The appliance must be used with the foot controller:
For the USA and Canada
This appliance has a polarized plug (one blade wider than the
electrician. Do not modify the plug in any way.
Note: Your H|CLASS™
sewing machine is adjusted to
provide the best stitch result
at normal room temperature.
Extreme hot and cold
temperatures can affect the
sewn result.