Connecting To The Power Supply; Packing Away After Sewing - Husqvarna Viking Designer I Usb User Manual

Unpacking
1. Place the machine on the table or cab i net, re-
move the packaging and lift off the cov er.
2. Remove the packing material, the foot control
and fi nally the protection cover.
3. The machine is delivered with an ac ces so ry bag
and a main cord. The foot control is equipped
with a cord reel.
4. Wipe the machine, particularly around the nee-
dle and needle plate to remove any soil be fore
sewing.

Connecting to the power supply

Among the accessories you will fi nd the main
cord. On the underside of the machine you will
fi nd information about the power supply (V) and
the frequency (Hz).
For USA and Canada
This sewing machine has a polarized plug (one
blade wider than the other). To reduce the risk of
electric shock, this plug is intended to fi t in a pola-
rized outlet only one way. If the plug does not fi t
fully in the outlet, reverse the plug. If it still does
not fi t, contact a qualifi ed electrician to install the
proper outlet. Do not modify the plug in any way.
Before plugging in, check to ensure that the
foot control is of "type FR3".
1. Pull out the cord from the foot control. Con-
nect the foot control cord to the front socket
(1) on the bottom right side of the machine.
2. Connect the main cord to the back socket (2)
on the bottom right side of the machine.
3. When you press the power switch to ON (3),
both the machine and the lights are switched on.

Packing away after sewing

1. Press the main switch to turn off the machine.
2. Unplug the cord from the wall socket and the
machine.
3. Wind the main cord around your hand and
place the cord in the pocket of the cover.
There is also space for the User's Guide.
4. Unplug the foot control cord from the ma-
chine. Pull the cord gently and release - the
cord will be wound into the foot control.
5. Check to ensure that all accessories are in the
accessory tray. Slide the tray on to the ma chine
around the free arm.
6. Place the foot control, underside towards you,
fi tting into the recess of the accessory tray at
the rear side of the machine.
6
USB
Learn your Designer I
1.
2.
3.