Connecting The Machine To Power Source; Foot Control; Sewing Light - Husqvarna Viking E10 User Manual

CONNECTING THE MACHINE TO POWER SOURCE

Connect the machine to a
power source as illustrated.
(1)
A polarized plug must be
used with the appropriate
polarized outlet. (2)
Attention:
Unplug power cord when
machine is not in use.

Foot control

Foot control regulates the
sewing speed. (3)
Attention:
Consult a quali ed
electrician if in doubt as to how to connect machine to power source. Unplug
power cord when machine is not in use.The appliance must be used with the foot
controller:
For USA and Canada, 110-120V:
For Australia and Europe, 220-240V:

Sewing light

Press main switch (A) for power and light on. (" l ")
For USA and Canada
For appliance with a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to t in a polarized outlet only
one way. If it does not t fully in the outlet, reverse the plug. If it still does not t, contact a
quali ed electrician to install the proper outlet. Do not modify the plug in any way.
KD-1902
KD-2902
1
3
9