Husqvarna Viking Viking E20 User Manual page 14

CHANGING THE NEEDLE (SYSTEM 130/705H)
14
Caution: Turn power switch to "O"
before inserting or removing the
needle.
thread breakage or skipped stitches.
needle for the fabric to be sewn. Turn
the hand wheel towards you until the
needle is at highest position. Loosen
the needle clamp screw (A) and tighten
again after inserting the new needle. (1)
Push the needle up (C) into the needle
clamp as far as it will go (D).
The sewing needle must always be
straight and sharp for smooth sewing.
Replace the needle (2) if it is bent (A),