Reports; Menu Settings Page; Event Log; Panel Menus - Lexmark E460dn Service Manual

4513-630, -63W, -6EW

Reports

The Reports menu contains two selections: Menu Settings Page and Event Log.

Menu Settings Page

To print the Menu Settings page, press

Event Log

The event log provides a history of printer errors. The event log can only be printed in the Configuration
menu. Additional options are available in the Diagnostics menu. See
To print the event log:
1.
Select Print Event Log from the Event Log menu.
2.
Press
Note: An event log printed from the CONFIG MENU will not contain debug information or secondary
codes for 900 service errors. However, the event log printed from DIAGNOSTICS mode does include this
information.

Panel Menus

The settings are On and Off. The default is On.

PPDS Emulation

This menu item activates or deactivates the PPDS emulation data stream. The selections are Deactivate
(default) and Activate. When PPDS emulation is activated, the following settings are also changed:
•
SmartSwitch settings for each port are turned off.
•
The printer language is changed to PPDS Emulation.
Users can still switch languages on the operator panel and through the PJL data stream.

Demo Mode

This setting contains a built-in demonstration mode. The settings allow you to turn the Demo Mode Off (default)
or On. While Demo Mode is set, the printer will start in Demo Mode until you change the setting.
Note: While Demo Mode is set to On, only demonstration files can print. Files received across the network or
from the host computer are ignored.

Factory Defaults

This setting enables a user to restore all the printer settings to the original factory settings. The selections are
Do not restore (default) and Restore now. Network does not appear unless you have a network printer. The
following settings are not changed:
•
Display language
•
Settings in the NETWORK/PORTS MENU group.
3-4
Service Manual
to return to the Configuration menu.
. Press to return to the Configuration menu.
"Reports" on page 3-16.