Color Menu; Osd Settings: Color - Grundig GULCD15S/DVD Instruction Manual

Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD").
Color GAIN can be used to correct color casts in the highlights of a picture and
color OFFSET can be used to correct color casts in the lowlights of a picture.
Example, the "red gain" control will alter the red content in the brighter parts of the
picture leaving the lower brightness parts unchanged and the "red offset"
will alter the red content of the lower brightness parts of the picture leaving
the brighter parts unchanged. The same applies for the Green and Blue options.
1. Press the MENU key on the remote.
2. Select COLOR with the RIGHT arrow key on the remote.
3. Select the option you want to change with the UP / DOWN keys on the remote.
4. Alter the values with the LEFT / RIGHT arrow keys on the remote.
5. You can EXIT this menu by pressing the MENU key on the remote twice.
NOTE:
When navigating the Menus you can use the controls on the TV, the Channel
buttons can be used as the UP / DOWN ( select option ) and the Volume buttons
can be used as the LEFT / RIGHT( alter value )

OSD Settings: Color

(for YPbPr input source)
PC 640 X 480 59.9 HZ
Refer to table for brief description of each option.
Color: 9300/6500/5500/User Color options
R Gain: Increase Red Highlights
G Gain: Increase Green Highlights
B Gain: Increase Blue Highlights
R Offset: Decrease Red Lowlights
G Offset: Decrease Green Lowlights
B Offset: Decrease Blue Lowlights
OSD Settings: Color
-20-