Table of Contents
Advertisement
Adjusting the view angle
Press down on the stand and gently adjust the set to a
suitable viewing angle.
The LCD TV monitor can be tilted 10 degrees backward.
Power connection
1. Connect adaptor to power input of TV.
2. Connect adapor to power cord.
3. Connect the other end of power cord to power supply.
Connecting to An Aerial
Connect antenna or CATV cable to the antenna port
of the tuner box.
Turning ON/OFF the TV
1. If power input is connected correctly, the LED on the front panel becomes
(i.e. stand-by mode). Press the POWER button on the function panel OR press
the red POWER button "
LED on the front panel becomes green.
2. To switch the TV off, press the POWER button on the function panel OR press the
red POWER button "
stand-by mode.
Auto Scan channels
1. Press the AV key and select input source to TV.
2. Press the MENU key on the remote control to show the On Screen
D splay
i
Menu (OSD).
u t
3. Press
key to select the TV icon on the top of screen.
p q
4. Press
key to high-light Auto Scan option. Then press
select the Auto Scan option.
5. Once scanning is finished, press MENU to exit.
If you would like the channels on certain numbers please refer to 'Manual scan' on
page 24.
Quick TV Set-Up Guide
" of the remote control. The TV will switch on and the
" of the remote control. The TV will switch off and go to the
-13-
10
POWER
Amber
2
5
u
key to
1
75
4
3
4
Hide quick links:
Advertisement
Table of Contents
