Related Manuals for Grundig GLCD1908HDV
Summary of Contents for Grundig GLCD1908HDV
- Page 1 MISURO HD LCD TV WITH DVD PLAYER GLCD1908HDV GLCD2208HDV The Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.95 per minute)
-
Page 2: Introduction
Introduction Thank you for buying this Grundig product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit‟s many features and to ensure you get the very best from your purchase. -
Page 3: Table Of Contents
Contents Introduction …………………………………..….………1 Safety Instructions ……………………………………...3-4 Unpacking ………………………………………..…..…5 Wall Mount Bracket Installation…………….….……..……6 View of TV………..………………………….………….…7-8 Remote Control …………………..………………….…9-12 Installation and Connection …………….…………..…….13 TV Basic Operation …………..…….…………………14-15 TV Channel Menu …………………...…….……….….16-28 DVD Player Operation ….……………..………………28-37 Multimedia Operation ….……………..……………….38-39 Other Operation …….……………………………………..39 Troubleshooting………………………………………40-41 Specifications ….………………………………………42-43 Display Modes...………………………………………….44... -
Page 4: Safety Instructions
Safety Instructions 1. Please read these operating instructions carefully before you operate this unit. Do not use this television near water. 3. Clean with a dry cloth only. 4. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. - Page 5 Installation Notes This TV can be connected to AC 100-240 Volts, 50/60 Hz power source. Never connect straight to a DC supply or any other power supply, then specified above. Locate the TV in the room where light does not directly strike the screen. ...
-
Page 6: Unpacking
Unpacking ___________________________________________ Please make sure that the following items are included with your LCD TV. If any item is missing, please contact the warranty line. TFT LCD TV Remote Control Operation Manual DC Adaptor Power Cord RCA Cable Car Cord - 5 -... -
Page 7: Wall Mount Bracket Installation
Wall Mount Bracket Installation Place the “LCD TV” on a solid surface. Use soft material to place over the front screen to avoid any damage. Remove the 5 screws (①②③④⑤) from the unit and take away the stand (Refer picture 1). (Picture 1) Using the plastic cover that came with the LCD screw in the 5 screws to fix the plastic cover on the bottom of the unit (Refer picture 2). -
Page 8: View Of Tv
View of the TV Front View Back View - 7 -... - Page 9 Remote Sensor Receives the remote signals from the remote control. Power Indicator In Power On Mode the indicator will turn blue. In Standby mode the indicator will be red. PLAY/PAUSE Button Press the Play/Pause Button to play or pause playback while watching a DVD.
-
Page 10: Remote Control
Remote Control - 9 -... - Page 11 Remote Control Keys Function 1. Power Button: Press the Power Button to switch the TV on or off. 2. Numeric Buttons: Press the Numeric Buttons to the Teletext. 3. CH.LIST Button: Press the Channel List Button to show the channel list. 4.
- Page 12 27. D.DISP Button: Press the D.Menu to display track information in DVD, USB, SD or MMC modes. 28. GOTO Button: Press the GOTO Button to find a play point in DVD mode. 29. Reveal/Angle Button: Press the Reveal Button to show any hidden information in the Teletext Menu.
- Page 13 Remote Control Battery Installation Replace battery by following the below steps: The remote control requires two AAA batteries. Open the battery cover as shown below: Install the batteries into the battery tray. Close the battery cover Caution: 1. Keep the batteries out of the reach of children. 2.
-
Page 14: Installation And Connection
Installation and Connection Connect the LCD TV 1. Connect the TV RF source to the RF IN port. TVRF signal including: Receiving antenna /satellite TV/CATV net. You can use 75Ω coaxial cable to connect the outdoor antenna. Outdoor Antenna Connection: Use 75Ω... -
Page 15: Tv Basic Operation
2. Connect the audio sources (including DVD and VCDR) to the Left and Right AUDIO Input. 3. Connect the video source to the VIDEO Input via the RCA cable for basic TV connection. 5. Insert the AC power into the DC adaptor, then connect the 12 Volt Input from the TV to its DC Output. - Page 16 previous or next channel or press the 0-9 Buttons to enter a channel number directly. Press the Button on the remote control to return to the previous channel that was last viewed. Press the P.MODE Button to cycle through the available video picture modes from the different options below.
-
Page 17: Tv Channel Menu
Press the CH- or CH+ Buttons to select the previous page or press the 0-9 numeric Buttons for your desired page. Note: The first number should not be „0‟ or „9‟. TV Channel Menu The TV Channel Menu will give you access to the program functions i.e. Auto Scan, Program Edit and Signal Information. - Page 18 When you select Auto Tuning, this screen will be displayed and the channel scan will begin automatically. DTV Manual Tuning Press the ◄or ► Buttons to select the individual DTV channel you wish to tune. Then press the ENTER to start scan. ATV Manual Tuning - 17 -...
-
Page 19: Program Edit
Press the ◄or ► Buttons to select the individual ATV channel you wish to tune. Then press the ENTER to start scan. Press the ▲or▼ Buttons to select the ATV Manual Tuning settings below you wish to adjust. Storage To Press the ►or ◄... - Page 20 To select the program edit settings press the ▲or▼ Buttons. See options below. Delete To delete a program or channel, press the Red Button and the DELETE mark will be displayed. Then press the Red Button again, to confirm and delete the current program.
-
Page 21: Picture Menu
will be displayed. This will set that channel to skip and you will not be able to search for this program. Press the Blue Button again to cancel the setting and the SKIP mark will disappear. To set a program to your favourites list, press the FAV Button and this mark will appear next to the program. -
Page 22: Sound Menu
Picture Mode To adjust press the ◄ or ► Buttons to scroll through the picture modes. Contrast Press the ◄ or ► Buttons to adjust the contrast Brightness Press the ◄ or ► Buttons to adjust the brightness. Colour Press the ◄ or ► Buttons to adjust the colour Sharpness Press the ◄... -
Page 23: Sound Mode
To enter the Sound Menu, press the LCD MENU Button and then press the ◄ or ► Buttons to select the SOUND Menu. ▲ or ▼ Buttons to scroll through the settings in the Sound Menu. Press the To return to the Main Menu, press the LCD MENU Button or to exit press the EXIT Button. -
Page 24: Time Menu
TIME Menu ◄ To enter the Time Menu, press the LCD MENU Button and then press the or ► Buttons to select the Time Menu. ▲ or ▼ Buttons to scroll through the settings in the Time Menu. To Press the return to the Main Menu, press the LCD MENU Button or to exit press the EXIT Button. -
Page 25: Time Zone
Press the ◄ or ► Buttons to set the sleep time. This will set your TV Standby Mode, if inactive for the selected amount of time; 240 min, 180 min, 120 min, 90 min, 60 min, 30 min, 20 min, and 10 min. Auto Sleep Press the ◄... -
Page 26: Lock Menu
The default language is English. Audio Language Press the ◄ or ► Buttons to select the Audio language. The default language is English. Subtitle Language Press the ◄ or ► Buttons to select the Subtitle language. The default language is English. Country Press the ◄... -
Page 27: Change Password
Once this is set to on, the setting will be password protected. Change Password ► To change the password, press the ENTER or Button to select this option and a pop-up menu will appear to enter your new password. The default password is “0000”. -
Page 28: Epg Menu
Lock Channel To set the Lock Channel Mode, press the ◄ or ► Buttons to turn it on or off. Set Source To set the Set Source, press the ◄ or ► Buttons to turn the lock on or off. Channel Number Based on whether DTV or ATV source is set, press the ◄... -
Page 29: Dvd Player Operation
The EPG (Electronic Programme Guide) Menu is used to look at what is being broadcast on a DTV or Radio channel. Press the EPG Button to access the EPG Menu, detailed program information of the channel currently being viewed will be displayed as well as a 7 day guide of is programmed. To see what is going to be broadcast after the current programme, press the ►... -
Page 30: Basic Operation
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Basic Operation Press the Input Button on the remote control to select the DVD function mode. Insert a disc into the slot of the DVD Player and it will read the disc automatically. -
Page 31: Repeat Play
This setting allows you to zoom in/out during DVD play. Press the ZOOM Button during normal play or when in slow motion. The DVD Player will magnify the center of the picture at 2x, 3x, 4x (Zoom In sizes) and 1/2, 1/3, 1/4 (Zoom Out Sizes). -
Page 32: Selecting The Camera Angles Setting
played, Titles remaining, Ch. played, Ch. remaining and Display off. Note: For different discs, D.DISP Button may have a different function. Playing Disc in a Favorite Order To combine your favorite titles, chapters or tracks and play them in your favorite order, follow the below instructions: How to Set Titles, Chapters and/or Tracks in your Favourite Order... -
Page 33: Selecting Subtitles
Notes: The angle function will not work on DVDs that do not contain recorded multiple angles. During pause mode you can still change the camera angles. However, when you resume to normal play, the camera angle will change to the new setting. ... -
Page 34: Displaying The Setup Menu Screen
played automatically. ▲,▼,◄ or 2. Press the you wish to play. Press the confirm your selection and enter play mode. 3. When playing an MP3 file you can press the to skip tracks. Notes: When playing MP3 Files, there will be no picture display, only audio output. -
Page 35: System Setup
to the Main Menu press the DVD SETUP Button again or to exit press the Exit Button. 1. System Setup TV SYSTEM This Menu enables you to set the picture format for your TV/DVD between NTSC/ PAL/ AUTO according to your request and local TV system. - Page 36 your TV in widescreen. This setting will allow the original aspect ratio to be displayed. Note: Playback screen size may be varied according to the disc contents. For discs with 4:3 contents, using any mode would only display 4:3 screen.
-
Page 37: Language Setup
menu settings to the factory default settings. Press the ENTER Button to confirm. Note: The password and Rating setting can not be restored. 2. Language Setup the▲,▼,◄ or ► Press Buttons to select the LANGUAGE setup icon, press the ENTER Button to confirm. You can choose the available languages as displayed on the screen Menu. -
Page 38: Digital Setup
does not support the surround sound effect. Use this setting when connecting the Coaxial Output to a receiver-amplifier not capable of decoding multi-channel audio. TONE the▲,▼,◄ or ► Press to adjust the Tone setting. 4. Digital Setup DYNAMIC RANGE the▲,▼,◄ or ► Press to adjust the compression ratio for different audio effect. -
Page 39: Multimedia Operation
MULTIMEDIA OPERATION To play files on your USB or SD/MMC card, insert the USB flash stick or SD/MMC card into the inputs provided. Then press the Input Button on remote control to select STORAGE or CARD source and enter into Multimedia Menu. -
Page 40: Other Operation
Movie Press the Buttons to select Movie Menu and then press the ENTER Button to enter the Menu. Press the Buttons to select the file you wish to play. Press the EXIT Button to go back to previous Menu. Multimedia Files Basic Operation Please follow the DVD Basic Operations. -
Page 41: Troubleshooting
If you have any issues or queries about the functions of this TV, please check the below table as we have provided you with FAQs to assist with any issues. If this table is not of assistance, please contact the Grundig warranty line. DVD Player... - Page 42 Issue Solution No power Turn off the unit on the remote and at the wall socket. Pull out the power plug. Wait 60 seconds and then plug the power cord back in turn the power and unit back on. No picture Check that your cables and antenna have been connected firmly.
-
Page 43: Specifications
Specifications Model No. Screen size Screen format Resolution Contrast Brightness Display colours View angle Response time TV system DTV decode DTV de-mod. Tuner Compatible with CD/MP3/WMA/JPEG/VCD/DVD formats USB/SD/MMC Compat ble with MPEG4/MPEG2/MPEG1/BMP/PNG/JPG/MP3/WMA/AAC DC 12V HDMI PC VGA YPbPr input AV input Terminals PC audio in Coaxial output... -
Page 44: Specifications
Earphone out SD/MMC Card Reader DVD AV output Audio output Gross weight Power supply Power Consumption * Design and specifications are subject to change without prior notice. GLCD1908HDV 19 inch 16:9 1440*900 1000:1 300 cd/m² 16.7M 160° (horizontal) / 160° (vertical) -
Page 45: Display Modes
Display modes Resolution 720x400 640x400 640x480(VGA) 640x480(VGA) 640x480(VGA) 800x600(SVGA) 800x600(SVGA) 800x600(SVGA) 1024x768(XGA) 1024x768(XGA) 1024x768(XGA) 1280x1024(SXGA) 1280x1024(SXGA) 1. Display modes which are not listed in the above table, may not be supported, by this unit. For an optimal picture it is recommended to choose a mode listed in the table above. -
Page 46: Warranty
In the unlikely event that your product fails to work normally, please contact Grundig Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand) and have your receipt of purchase on hand. - Page 47 PO BOX 6287 Silverwater NSW 1811 www.grundig.net.au Ver. 1 24 -MAY-2010 - 46 -...