Direct Frequency Entry Tuning; Squelch Control; Tuning In Stations - Grundig SATELLIT 750 Owner's Manual

SATELLIT 750 OWNER'S MANUAL
RF GAIN CONTROL continued
may improve the radio's rejection of interference from adjacent
frequencies that may interfere, especially on Shortwave. This switch
does not work in FM.

SQUELCH CONTROL

Using the squelch control eliminates background noise. This control
is used mainly in the aircraft band. It does not work in the FM band.
This control is on the lower right front of the radio. To engage it,
turn it on by turning the knob clockwise. Turn it off by clicking the
knob fully counterclockwise.

TUNING IN STATIONS

Stations are tuned using Direct Frequency Entry, the Buttons and
the Tuning Knob, as described below.

DIRECT FREQUENCY ENTRY TUNING

Use this method when the desired frequency of a radio station
is known. Turn on the SATELLIT 750 and select the band of your
choice. AM and SW frequencies are entered in kilohertz (KHz), e.g.
810 KHz or 9475 KHz.; FM frequencies are entered in megahertz
(MHz), e.g. 102.9 MHz, ignoring the decimal point. Use the numeric
keypad to enter the frequency.
9