Agilent Technologies 2000 X-Series User Manual page 4

• 8.5 inch WVGA display.
• Interleaved 2 GSa/s or non- interleaved 1 GSa/s sample rate.
• 100 Kpts per channel MegaZoom IV acquisition memory for the fastest
• All knobs are pushable for making quick selections.
• Trigger types: edge, pulse width, pattern, and video.
• Serial decode/trigger options for: CAN/LIN, I
• Math waveforms: add, subtract, multiply, and FFT.
• Reference waveforms (2) for comparing with other channel or math
• Many built- in measurements.
• Built- in license- enabled waveform generator with: sine, square, ramp,
• USB ports make printing, saving and sharing data easy.
• Optional LAN/VGA module for connecting to a network and displaying
• Optional GPIB module.
• A Quick Help system is built into the oscilloscope. Press and hold any
For more information about InfiniiVision oscilloscopes, see:
"www.agilent.com/find/scope"
4
An MSO lets you debug your mixed- signal designs using analog signals
and tightly correlated digital signals simultaneously. The 8 digital
channels have a 1 GSa/s sample rate, with a 50 MHz toggle rate.
waveform update rates, uncompromised. Upgradeable to 1 Mpts per
channel.
There is a Lister for displaying serial decode packets.
Digital channels and serial decode cannot be on at the same time. The
[Serial] key takes precedence over the [Digital] key. Serial triggers can be
used when digital channels are on.
waveforms.
pulse, DC, noise.
the screen on a different monitor.
key to display Quick Help. Complete instructions for using the quick
help system are given in "Access the Built- In Quick Help"
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
2
C/SPI, and UART/RS232.
on page 42.