Pulse Width Trigger - Agilent Technologies 2000 X-Series User Manual

Pulse Width Trigger

Pulse Width (glitch) triggering sets the oscilloscope to trigger on a positive
or negative pulse of a specified width. If you want to trigger on a specific
timeout value, use Pattern trigger in the Trigger Menu (see
Trigger"
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
3 Press the Source softkey; then, rotate the Entry knob to select a channel
4 Adjust the trigger level:
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 128).
to select Pulse Width.
source for the trigger.
The channel you select is shown in the upper- right corner of the
display next to the polarity symbol.
The source can be any analog or digital channel available on your
oscilloscope.
• For analog channels, turn the Trigger Level knob.
10
Triggers
"Pattern
131