Spa Components - Coleman 300 Series Owner's Manual

Spa Components

Reference only. Equipment is not always as shown.
Note:
A. Pumps (One pump or two pumps, depending
on model): Low speed for efficient water circu-
lation during filtration and heating; high speed for
maximum action of the jets. The pump functions
are activated by topside controls.
B. Warning and Installation Label: Contains
important safety information and installation
instructions.
C. Slice Valve: Used to shut off water flow from the
spa to the equipment while servicing. Quantity
will vary depending on model. All should be open
during normal operations.
A
No consumer serviceable parts. We recommend that only an authorized
service technician perform hot tub repair or service.
E
C
D. Electrical Connections: Contains outlets for
electrical plug connections.
made during manufacture of the spa.
E. Heater Assembly: Thermostatically controlled
and equipped with an overheat safety shut-off.
5
C
B D
Connections are