Turtle Beach Earforce Z300 User Manual page 11

The USB Transceiver and Pairing
Press and hold the transceiver Pairing Button for five seconds until the transceiver pairing indicator LED flashes
4
rapidly. The Z300 will announce "Headset Paired."
After a few seconds, the transceiver pairing indicator LED should stay Solid on and the headset LED should flash about
once per second, confirming that the units are paired.
Interference from Two Headsets
Do not try to pair two headsets with the same USB transceiver. This will cause interference as they compete for the
transceiver radio frequency (RF) signal. One headset will shut off.
B
Go to Table of Contents
5 seconds
A
8