Parts And Controls P3 - Turtle Beach Earforce Z300 User Manual

Parts and Controls
Left Ear Cup Controls
2
1
1. Power Button with LED
Powering ON: Press until the headset announces "Powering On."
Powering OFF: Press and hold until the headset announces "Powering Off."
Pairing Mode: The Power Button also initiates pairing between the headset and USB transceiver. (See "The USB transceiver
and pairing" on pg. 7 for details.)
Power Button LED: A white LED inside the Power Button flashes once per second when paired to the USB transceiver and
twice per second when not paired.
2. Tone Effects Button
Cycles through the four different tone effects settings, which can emphasize specific sounds important for game play. The
headset announces each selection. (See "Adjusting Sound" on pg. 18 for details.)
3. Dynamic Range Compression (DRC) Button
Press to activate DRC, which emphasizes the softer sounds important in certain games. The headset will announce
"Compression On." Press again to turn DRC off. The headset will announce "Compression Off." (See "Adjusting Sound"
on pg. 18 for details.)
4. Removable Microphone with Adjustable Boom
The microphone boom is shipped disconnected from the headset. The microphone boom can also be detached from the
headset when chat is not required. (See "Initial Setup" on pg. 6 for details.)
5. Variable Mic Monitor
Hear yourself speaking through the headset. (Does not affect the volume heard by others over Chat.)
6. Mobile Device Jack
Connects to the supplied mobile device cable. This 2.5 mm mini-jack inputs phone call audio or music from a mobile
phone or digital music player and also outputs the microphone signal to a mobile phone.
7. Master Volume
Turn to adjust the volume level of the headset.
Side view
3
4
Go to Table of Contents
5 6
Bottom view
7
3