Cache Upgrade; Peripheral Device Installation - TYAN S1570 AT User Manual

3.12 Upgrading Cache Memory
The S1570 has 512kb of on-board pipelined burst SRAM and cannot be
field upgraded. The TX chipset can cache a maximium
of 64MB of RAM.

3.13 Peripheral Device Installation

After all the jumpers on the mainboard have been set, then it can be mounted
into the case. Proceed to install the display card and any other peripheral
devices.
If a PCI-Bus interface card is to be installed in the system, any one of the
five PCI-Bus slots can support either a Master or a Slave device.
After installing the peripheral controllers, the user should check everything
again, and prepare to power on the system.
S1570-001-01 http://www.tyan.com 17