Table of Contents
Advertisement
3. Using the phone
NOTE
Your handset will automatically time the duration of all
external calls. The handset display shows the call duration
both during and for a few seconds after your call.
3.1
Switch the handset power on/off
To switch off:
R
1. Press and hold
To switch on:
R
1. Press and hold
come back on.
3.2
Make an external call
When you make a call, the backlight on the handset display
comes on and the In Use light on the base flashes.
1. Lift the handset and press
are displayed.
2. When you hear the dialling tone, dial the number you want.
3.3
Preparatory dialling
1. Enter the number first. If you make a mistake, press
n
to delete the last digit.
<
2. Press
to dial.
Using the phone
until the display goes off.
for 3 seconds and the display will
<
. The
and
symbols
NOTE
u
Press
to enter a pause in the dialling sequence.
You can enter a pre-dial number up to 32 digits long, Only
the last 12 digits will be displayed.
3.4
End a call
<
1. Press
.
Or
Place the handset back on the charger.
3.5
Receive a call
When you receive a call, the phone rings, the
flashes, the keypad backlight comes on and the Calls light on
Call
the base flashes.
is displayed and the
flashes to let you know if it is an external or internal call.
1. If your handset is on the charger and auto-answer is on:
pick up the handset to answer the call.
Or
If your handset is on the charger and auto-answer is off:
pick up the handset and press
Or
If your handset is off the charger, press
symbol
or
symbol
<
to answer the call.
<
.
15
Advertisement
Table of Contents
