NOTE
Handsets must be GAP compatible to be able to be
registered to your O1 base.
9.3
Registering your O1 handset to
another base
1. Follow the instructions shown in the other manufacturer's
guide to put the base into registration mode.
2. Follow steps 2 to 6 of "Registering a new O1 handset"
on page 30 to register the handset.
9.4
Select a base
If your O1 handset is registered to more than one base, you
can select which base to use. Alternatively, if you select
your handset will automatically select the base with the best
reception.
m
1. Press
to open the main menu.
u
d
Register
2. Press
or
until
m
.
u
d
3. Press
or
to highlight
m
.
u
d
4. Press
or
to select a base number (1 to 4) or select
m
Auto
and press
n
5. Press
repeatedly to exit and return to standby.
Using additional handsets
AUTO
is displayed, then press
Select Base
and press
to confirm.
NOTE
When selecting a base, the currently selected base number
flashes.
If an invalid base selection is entered, you will hear the error
tone.
9.5
De-register a handset
You cannot de-register the handset you are using.
m
1. Press
to open the main menu.
u
d
Setup
2. Press
or
until
m
.
u
d
3. Press
or
to select
4. Enter the 4 digit PIN code, then press
5. Enter the number of the handset to be removed (1 – 5)
using the keypad. You will hear a tone to confirm the
handset has been de-registered.
n
6. Press
repeatedly to exit and return to standby.
9.6
Internal calls
If you have more than one handset registered to the base,
you can make internal calls between two handsets.
I
1. Press
. The
and
2. Enter the handset number (1-5) you want to call.
is displayed, then press
m
Del Handset
and press
m
.
symbols are displayed.
.
31