Panasonic Lumix DMC-TS3 Basic Owner's Manual page 65

Using an AC adaptor (optional) and a DC coupler (optional) instead of the battery
The AC Adaptor (optional) can only be used with the
designated Panasonic DC coupler (optional). The AC
adaptor (optional) cannot be used by itself.
Open the side door
Insert the DC coupler, being careful of the direction.
Plug the AC adaptor into an electrical outlet.
Connect the AC adaptor
the DC coupler.
•
Ensure that only the AC adaptor and DC coupler for this
camera are used. Using any other equipment may cause
damage.
Note
• Always use a genuine Panasonic AC adaptor (optional).
•
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
•
Side door cannot be closed while the AC adaptor is connected.
•
Some tripods cannot be attached when the DC coupler is connected.
•
Do not apply any force to the side door with the weight of the cable or your hand when
the AC adaptor is connected. It may cause damage.
•
The DC coupler may get disconnected from this unit if a cable is pulled when connecting
the AC adaptor, so take caution.
•
Also read the operating instructions for the AC adaptor and DC coupler.
•
Waterproof function does not operate when the AC adaptor is connected.
Preparation
.
to the [DC IN] socket
- 23 -
of