Update The Gps Information - Panasonic Lumix DMC-TS3 Basic Owner's Manual

When the displayed location name information is different from the current location or
when the positioning is not successful, move to a location where the radio waves from
GPS satellites can be received better and perform the positioning update.
Select [Repositioning] from the [GPS/Sensor] menu, and then press
[MENU/SET]. (P44)
•
Positioning is started and the current location information is updated once the positioning is
successful.
•
Positioning can be updated skipping the information confirmation screen by selecting [
[ ] from the Quick Menu (P45), and then pressing [MENU/SET].
w Checking GPS reception
1
Select [INFO] from the [GPS Setting] menu, and then press [MEUNU/SET].
•
Last updated positioning result is displayed.
Time positioning was performed
Number of GPS satellites received from
Latitude
Longitude
2
Press [MENU/SET] in the information confirmation screen.
•
Positioning is started and the current location information is updated once the positioning
is successful.
w About the time interval of the positioning
•
Even if you do not perform [Repositioning], it will perform the positioning automatically right
after the power is turned on, and in constant time intervals. (When [GPS Setting] is not set to
[OFF])
• It will perform the positioning in constant time intervals even when the power is turned off with
[GPS Setting] set to [ON].
•
Positioning with the power turned off is canceled in the following cases:
–
When the remaining battery power becomes [
–
When the power is not turned on for a specific period of time
Recording

Update the GPS information

- 86 -
]
] or