Message Display - Panasonic Lumix DMC-TS3 Basic Owner's Manual

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[GPS feature is not available in this region.]
•
The GPS may not operate in China or close to the Chinese border in neighbouring countries.
(As of December 2010)
[This picture is protected]
 Delete the picture after canceling the protect setting.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•
Pictures not based on the DCF standard cannot be deleted.
 If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P53)
[Cannot be set on this picture]
•
[Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF
standard.
[Not enough space on built-in memory]/[Not enough memory on the card]
•
There is no space left on the built-in memory or the card.
•
When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
•
The following pictures cannot be copied.
–
When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)
– Files not based on the DCF standard.
•
Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error
Format built-in memory?]
•
This message will be displayed when you formatted the built-in memory on a PC.
 Format the built-in memory on the camera again.
will be deleted.
Others
(P136)
(P53) The data on the built-in memory
- 171 -