Menu ( "Set" ) Mode - Standard Horizon HX300E Owner's Manual

8. MENU ( "SET" ) MODE

The HX300E's Menu Mode allows a number of the HX300E operating pa-
rameters to be custom-configured.
The Menu Mode is easy to activate and set, using the following procedure:
1. Turn the transceiver off by press and holding the
2. Hold down the
er while still holding down the
3. After " " icon appears on the display let go of both
keys.
4. The key when pressed scrolls through each menu
item:
LP - Lamp mode,
bP - key beep,
SC - Scan Mode,
dt - Dual watch or Tri-Watch mode,
FL - Water Enabled Strobe Menu,
5. Press the
the selected menu item.
6. Press the
7. After completing your adjustment, turn the transceiver off and on by
press and holding the
LP ( LAMP MODE )
Function: Selects the Lamp illumination method for the LCD/Keypad.
Available Values: on / ky / oF
Default: kEY
on: Illuminates the LCD/Keypad continuously.
ky: Illuminates the LCD/Keypad for 5 seconds when any
key is pressed.
oF: Turns off the backlight for the LCD and keys.
bP ( BEEP )
Function: Enable/Disable the Keypad beeper.
Available Values: HI / Lo / oF
Default: HI
HX300E
key, and then turn on the transceiv-
or key will change the selection of
key to save the menu selection.
key.
key.
key.
Page 31