Selecting Scan Type - Standard Horizon HX300E Owner's Manual

been selected to the scan channel.
4. Repeat step 3 for all desired channels to be programmed into scan mem-
ory.
5. To DELETE a channel from the scan memory, select the channel by
pressing the
pears from the display.
6. When you have completed programming scan memory, turn the trans-
ceiver off and on by press and holding the

6.7.2 SELECTING SCAN TYPE

1. Turn the transceiver off by press and holding the
2. Hold down the
er while still holding down the
3. " " icon will appear on the display, indicating the
Menu ("Set") Mode has been activated.
4. Press the
right of the display.
5. Press the
or " MS (Memory Scan)". The factory default is " PS
(Priority Scan)".
Priority Scan: Scans the Scan Memory Channel,
Memory Scan: Scans the Scan Memory and chan-
6. After completing your selection, turn the transceiver
off and on by press and holding the
P
riority
HX300E
or key, then press the
key, and then turn on the transceiv-
key until " SC " is shown in the bottom
or key to select " PS (Priority Scan)"
Preset Channel, and the Priority
Channel (Channel 16).
nels programmed into the Preset
Channel memory.
S
can
key. The " " icon disap-
key.
key.
key.
key.
M S
eMory can
Page 25