Tri-Watch - Standard Horizon HX300E Owner's Manual

6.9 TRI-WATCH

You may change the Dual Watch feature to Tri-Watch via the Menu ("Set")
Mode. Refer to Menu Mode Item "dt ( DUAL WATCH MODE ) " on page 32 for
details.
The Tri-Watch scans Channel 16, 9, and one other channel. When enabled,
a " " icon will appear on the display when the Dual Watch feature is acti-
vated.
1. Press the
9 and 16.
2. Press and hold the
vate the TRI-Watch feature. "
the display when the Tri-Watch feature is activated.
3. When a transmission is received on the channel 16,
HX300E will stay on the channel 16 until the incoming
signal disappears.
4. When a transmission is received on the channel 9,
the HX300E will Dual watch between the channel 16
and channel 9.
5. When the HX300E receives a transmission on the
working channel, the HX300E will Tri-watch between
the working channel, channel 16, and channel 9.
6. To stop the Tri-watch feature and return to normal op-
eration, press the
Page 28
/ key to select the channel to scan along with Channel
key for two seconds to acti-
key.
" icon will appear on
t W
ri atch
HX300E