Operation; Priority Scan; Memory Scan - Standard Horizon HX300E Owner's Manual

6.7.3 OPERATION

The operation of the "Priority Scan" or "Memory Scan" is determined via the
section "6.8.2 SELECTING THE SCAN TYPE"

6.7.3.1 Priority Scan

1. Press the
the squelch adjusting mode, then press the
ground noise disappears.
2. Press the
blinking "
play during scanning.
3. When the HX300E receives a transmission on a
working channel, it will stop on the working channel
and "Dual Watch" (described in next chapter) to the
priority channel until the incoming signal disappears,
then start scanning again.
4. When the HX300E receives a signal on the Priority
channel it will stay on this channel until the incoming
signal disappears, then start Priority scanning again.
5. To stop the scanning, press the

6.7.3.2 Memory Scan

1. Press the
vate the squelch adjusting mode, then press the
background noise disappears.
2. Press the
blinking " " icon will appears on the display during
scanning.
3. When the HX300E receives a transmission, it will
stop on the channel until the incoming signal disap-
pears, then start scanning again.
4. To stop the scanning, press the
Page 26
key two times until the "SQL" indicator blinks, to activate
key to start scanning, a "
" and " " icons will appears on the dis-
key several times until the "SQL" indicator blinks, to acti-
key to start scanning, a "
/
" icon and
key.
" icon and
key.
key until the back-
/ key until the
HX300E