Front Fender Installation Continued:
Model without Front Refl ector:
8. Place the Fender (3) in the fork
with the longer fork mounting tab
(A) on the rear side of the fork (fi g
02).
9. Insert the Bolt (8) through the
Washer (9) and Fender Tabs (A,D)
and fork mounting hole.
10. Install Washer (9) and Nut (10)
onto Bolt (8) and tighten securely.
Attaching Lower Fender Braces:
11. Line up the lower Fender Braces
(B) with the Fork Mounting Tabs
(C) (fi g 03).
12. Insert each lower mounting Bolt
(7) and Washer (6) into the Fork
Mounting Tabs (C) and tighten
securely.
10
8
9
A
7
Meijer.com
9
10
3
fig 01
fig 02
C
B
6
fig 03