Dhcp Server Settings - D-Link DWR-116 User Manual

Section 3 - Configuration
The DWR-116 has a built-in DHCP (Dynamic Host Control Protocol)
server. The DHCP server assigns IP addresses to devices on
the network that request them. By default, the DHCP Server is
enabled on the device. The DHCP address pool contains a range
of IP addresses, which are automatically assigned to the clients
on the network.
Enable DHCP Select this box to enable the DHCP server on
Server: your router.
DHCP IP Enter the starting and ending IP address for
Address Range: the server's IP address pool.
DHCP Lease The time period for the IP address lease. Enter
Time: the lease time in minutes.
Primary DNS IP Assign a primary DNS Server to DHCP clients.
Address:
Secondary DNS Assign a DNS Server to DHCP clients.
IP Address:
Primary WINS IP Assign a primary WINS Server to DHCP clients.
Address:
Secondary WINS Assign a WINS Server to DHCP clients.
IP Address:
Click Save. Settings to save your changes,
or click Don't.Save.Settings to discard your
changes.
D-Link DWR-116 User Manual

DHCP Server Settings

34