D-Link DWR-116 User Manual page 15

Section 3 - Configuration
The subsequent configuration pages will differ depending on the selection you make during step 3 of the wizard.
DHCP Connection Choose this if your Internet connection automatically provides you with an IP Address. Most cable modems use this type of
(Dynamic IP connection. See page 12 for information about how to configure this type of connection.
Address):
Username Choose this option if your Internet connection requires a username and password to connect. Most DSL modems use this style
/ Password of connection. See page 12 for information about how to configure this type of connection.
Connection
(PPPoE):
Username Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP). See page 13 for information
/ Password about how to configure this type of connection.
Connection (PPTP):
Username Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See page 13 for information about how
/ Password to configure this type of connection.
Connection (L2TP):
3G/4G LTE Choose this option if your Internet Setup Provider provided you with a user name and password to use with your 3G / 4G LTE
Connection: enabled USB Dongle. See page 14 for information about how to configure this type of connection.
Static IP Address Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually configured.
Connection: See page 14 for information about how to configure this type of connection.
D-Link DWR-116 User Manual 11