D-Link DWR-116 User Manual page 16

Section 3 - Configuration
DHCP.Connection.(Dynamic.IP.Address):
Mac Address: The default MAC Address is set to the Internet
port's physical interface MAC address on the
broadband router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
button to replace the Internet port's MAC
address with the MAC address of your PC.
Host Name: Enter the host name for your router or
computer.
Click Next to continue, Prev to go back to
the previous page or click Cancel to close the
wizard.
Username./.Password.Connection.(PPPoE):
IP Address: Fill in if provided by your ISP. If not, keep the
default value.
Username: The username/account name that your ISP
provides to you for PPPoE dial-up.
Password: Password that your ISP provides to you for
PPPoE dial-up.
Service Name: (Optional) Fill in if provided by your ISP.
Click Next to continue, Prev to go back to
the previous page or click Cancel to close the
wizard.
D-Link DWR-116 User Manual 12