Reset Procedures - Yaesu VX-8GR Operating Manual

In some instances of erratic or unpredictable operation, the cause may be corruption of
data in the microprocessor (due to static electricity, etc.). If this happens, resetting of the
microprocessor may restore normal operation.
Note that all memories will be erased if you do a complete microprocessor reset,
as described below.
M
To clear all memories and other settings to factory defaults:
1. Turn the radio off.
2. Press and hold in the
3. Press the key briefly to reset all settings to their factory defaults (press any other
key to cancel the Reset procedure).
S M R
To reset the Set Mode (includes the APRS /GPS Set Mode) settings to their factory de-
faults:
1. Turn the radio off.
2. Press and hold in the
3. Press the key briefly to reset the Set Mode Item settings to their factory defaults
(press any other key to cancel the Reset procedure).
:Except the following Set Mode Items.
Set Mode
APRS /GPS Set Mode 4: APRS MSG FLASH, 16: DIGI PASS,
VX-8GR O
R
, , and
and
6: BANK NAME, 15: CLOCK SHIFT, 16: CW ID,
21: DCS CODE, 22: DCS INVERSION,
25: DTMF SELECT, 29: EMERGENCY SELECT,
32: HALF DEVIATION, 37: INTERNET CODE,
40: INTERNET SELECT, 47: MEMORY FIRST STEP,
48: MEMORY NAME, 50: MEMORY SKIP,
54: MESSAGE SELECT, 62: PAGER CODE-RX,
63: PAGER CODE-TX, 70: RPT SHIFT,
71: RPT SHIFT FREQ, 88: SQL TYPE,
91: TONE FREQUENCY,
21: MSG GROUP, 22: MY CALLSIGN,
23: MY POSITION, 24: MY SYMBOL
M
R
ESET
keys while turning the radio on.
keys while turning the radio on.
P
ROCEDURES
121