Disabling The Busy Indicator - Yaesu VX-8GR Operating Manual

Further battery conservation may be accomplished by disabling the BUSY indicator while
receiving a signal. Use the following procedure:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 14: BUSY
LED.
3. Press the
Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to "OFF"
(thus disabling the BUSY lamp).
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
To enable the BUSY indicator, just repeat the above procedure, rotating the DIAL knob to
select "ON" in step 4 above.
A
The APO feature helps conserve battery life by automatically turning the radio off after a
user-defined period of time within which there has been no dial or key activity.
The available selections for the time before power-off are 0.5 - 12.0 hour, as well as APO
Off. The default condition for the APO is OFF, and here is the procedure for activating it:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 2: APO.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the desired time period after
which the radio will automatically shut down.
5. When you have completed your selection, press the PTT
switch to save the new setting and exit to normal operation.
When the APO is activated, the "
center bottom on the LCD. If there is no action by you within
the time interval programmed, the microprocessor will shut down
the radio automatically.
Just press and hold in the
turn the transceiver back on after an APO shutdown, as usual.
To disable the APO, just repeat the above procedure, rotating the DIAL knob to select
"OFF" in step 4 above.
VX-8GR O
D
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
P
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
" icon will appear at the
( PWR ) switch for 2 seconds to
M
M
ISCELLANEOUS
BUSY I
-O APO F
S
ETTING
113