Notes On Ergonomic Colour Adjustment - Fujitsu Siemens Computers SCENICVIEW B15-1A Operating Manual

Colour monitor SCENICVIEW B15-1A
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The Auto Processing
message is displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.

Notes on ergonomic colour adjustment

If you select colours for the display in your application programmes, take note of the information
below.
The primary colours blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Background
black
black
white +
purple +
blue -
cyan +
green +
yellow +
red -
+ Colour combination very suitable
- Colour combination not suitable because colour locations are too close together, thin
characters are not identifiable or rigorous focusing is demanded of the human eye.
18 - English
white purple
+ +
+
+
+ -
- -
- -
- +
+ -
Characters
blue cyan green
- +
+ -
- -
+
+
+ -
+ -
- -
yellow red
+ +
- -
- -
- +
- -
-
-
- +
A26361-K938-Z100-2-5E19
-
+
-
-
-
-
+