Pin Assignment D-Sub; Trouble Shooting - Fujitsu Siemens Computers SCENICVIEW B15-1A Operating Manual

Pin assignment D-SUB

Pin
1 Video input red
2 Video input green
3 Video input blue
4
5
6 Red video ground
7 Green video ground
8 Blue video ground

Trouble shooting

Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer and/or with another data cable.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
No screen display
(power indicator does not light)
No screen display
(power indicator lights)
Message:
No Signal
A26361-K938-Z100-2-5E19
10
Meaning
Ground
Ground
Colour monitor SCENICVIEW B15-1A
1
5
6
11
15
Pin
9
10
11
12
13
14
15
Check the following points:
► Check whether the monitor is switched on.
► Check whether the power cable on the
monitor is connected correctly.
► Check whether the computer is switched on.
► Check whether the computer is switched on.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press any key on the computer keyboard -
the computer may be in energy saving
mode.
► Alter the brightness and/or contrast until you
get a picture.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Check whether the computer is switched on.
Meaning
+5 V (DDC)
Sync. ground
Ground
DDC-Data
H. sync
V. sync
DDC Clock
English - 21