Notes On Ergonomic Colour Adjustment - Fujitsu Siemens Computers SCENICVIEW P996-1 Operating Manual

Notes on ergonomic colour adjustment

If you select colours for the display in your application programmes, take note of the information
below.
The primary colours blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Background
black
black
white +
purple +
blue –
cyan +
green +
yellow +
red –
+ Colour combination very suitable; light background colours are only suitable for devices which
are operated with a refresh rate of at least 75 Hz.
– Colour combination not suitable because colour locations are too close together, thin
characters are not identifiable or rigorous focusing is demanded of the human eye.
A26361-K967-Z100-1-5E19,
Downloaded from ManualMonitor.com Manuals
In the first line of this view you see the set horizontal frequency and
the refresh rate of the monitor.
In the second line you see the set screen resolution. If none of the
default operating modes is set, for example "PP" is shown instead
of the screen resolution.
An overview of the default operating modes is provided in the
section "Preset operating modes".
white purple
+ +
+
+
+ –
– –
– –
– +
+ –
Edition
1
Colour Monitor SCENICVIEW P996-1
Characters
blue cyan green
– + +
+ – –
– – –
+ –
+ –
+ –
+ – –
– – –
yellow red
+ –
– +
– –
+ –
– –
– –
+
+
English - 17