Step 6: Attach The Oven To The Wall - Amana MVH140E Owner's Manual & Installation Instructions

Over-the-range
Hide thumbs Also See for MVH140E:
Table of Contents

Advertisement

Available languages

Available languages

STEP 6: ATTACH THE OVEN TO THE WALL

W A R N I N G
You will need two people to lift this microwave.
Failure to use more than one person could
result in personal injury.
1. Carefully lift microwave oven and hang it on support tabs (See
Figure 28 at the bottom of the mounting plate. Reaching
through upper cabinet, thread power supply cord through the
power supply cord hole in the bottom of the upper cabinet. See
Figure 32.
2. Rotate the microwave upward so the top of oven is against the
bottom of the upper cabinet or cabinet frame.
3. Drop the lock pin and washer assembly into hole N (left
side hole) and push the pin down as far as it will go.
See Figure 33.
4. Place washers over two 1/4"x3" bolts. Then insert a bolt down
through each hole in the upper cabinet bottom.
Tighten the bolts until the gap between the upper cabinet
and microwave oven is closed. See Figure 34.
5. Remove the lock pin and washer.
If wall-vented or room-vented installation is used, skip to
No. 8.
INSTALLATION
- 42 -
power cord
Figure 32
lock pin
washer
Figure 33
Figure 34
power cord
hole

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvh140w

Table of Contents