Amana MVH140E Owner's Manual & Installation Instructions page 38

STEP 3: PREPARE THE VENTING BLOWER
Use side cutters or tin snips.
blower plate
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and two blower
plate screws. Remove the blower plate from cabinet. See
Figure 17.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit 90˚ so the exhaust ports face the front of
the cabinet. See Figure 18.
4. Place the blower unit back into the microwave oven.
Check that the exhaust ports face towards the rear of the
oven and are aligned with the oven exhaust ports.
5. Reattach blower plate to microwave oven. Attach with one
blower unit mounting screw and then two blower plate
mounting screws. See Figure 19.
INSTALLATION
Knockouts B
Figure 15
blower
unit
Figure 18
blower unit
exhaust ports
blower
plate
blower
unit
blower
plate
blower
unit
blower unit
exhaust ports
blower
plate
- 38 -
blower plate
mounting
screws
blower unit
mounting screw
Figure 16
blower plate
mounting screws
blower unit
mounting screw
Figure 17
blower plate
mounting
screws
blower unit
mounting screw
Figure 19