Wells HRCP7200 Owner's Manual page 16

MAINTENANCE INSTRUCTIONS
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
INJURY HAZARD
Disconnect appliance from
electrical power before
cleaning condenser coil.
CAUTION:
INJURY HAZARD
Condenser coil fins are sharp.
Use care to avoid cuts while
cleaning the condenser.
CONDENSER COIL CLEANING INSTRUCTIONS
The condenser coil must be kept clean to allow adequate air flow for
proper heat dissipation. Recommend this procedure be performed
monthly.
1. Turn selector switch to OFF. Disconnect appliance from electrical
power.
2. Remove louvers or access panel to allow coil to be reached.
3. Using a stiff bristle brush, brush lint and debris from the condenser
fins. Brush vertically, top to bottom. Collect and discard all lint and
debris gathered from this operation
IMPORTANT: The fins of the condenser coil are delicate and
easily damaged. Use care to brush only in a vertical motion to
avoid damaging the coil fins.
4. Wipe the fan blades to remove accumulated lint.
5. Reconnect to electrical power. Refer to COLD Operation (page 7)
and test for proper operation.
14