Product Overview - Kodak i7300 User Manual

Product overview

4
The following illustration and descriptions will help you become familiar
with the components of the scanner.
The Manual Release Lever allows you to manually release the magazine
by inserting a thin object, such as a pencil, into the slot. This lever
should be used if a film jam or film breakage occurs. You may also use
this lever to release the film magazine if power is unavailable.
Power switch — this toggle switch allows you to turn the power on and
off. The power switch is located in the back of the scanner.
Side panel — provides access to the lamp housing and film path.
Film slot — use this slot to insert the film magazine from which images
will be retrieved.
LEDs — the status of the scanner can be determined by looking at the
LED display (when the power is on).
Green — indicates the scanner is ready for use.
Yellow — indicates an action is in process; i.e., threading film,
searching for an image address, scanning, refiling film, etc. If the
yellow light is steady, the scanner is searching for an image; if the
yellow light is flashing, an image is being scanned.
Red — indicates that an error has been detected, the scanner has
lost communication with the host, or the scanner application is not
active on the host PC. Error messages are displayed on the
scanner host PC in the Status bar or via a dialog box.
A-61404 February 2003