Introduction; Features - Kodak i7300 User Manual

1

Introduction

Features

2
This manual provides information and procedures for using the Kodak
i7300 Scanner and the Kodak Digital Science Intelligent Microimage
Scanner. For the purpose of this manual, the term scanner will be used
when referring to the Kodak i7300 Scanner and/or the Kodak Digital
Science Intelligent Microimage Scanner unless otherwise noted.
The scanner is a 16 mm film retrieval subsystem that is interfaced with
a personal computer (PC), which is used to retrieve 16 mm film with
and without image marks. The Kodak i7300 Scanner Application
Software, provided by Kodak, controls the scanner.
Information regarding the application software can be found in the User's
Guide for the Kodak i7300 Scanner Application Software,
A-61133.
The following information is provided in this manual:
Chapter 1, Introduction — includes information regarding product
features, system requirements, and a product overview.
Chapter 2, Using the Scanner — provides procedures for turning the
power on and off, inserting a film magazine and loading/unloading film.
Chapter 3, Maintenance — includes procedures for replacing the
projection lamp as well as a list of supplies and how to order them.
Chapter 4, Troubleshooting — provides a listing of possible error codes
you may encounter while using the scanner.
Appendix A, Microfilm Information — includes microfilm information that
is helpful when using the scanner.
The scanner provides the following features:
Desktop film scanner — the scanner is compact and easily sits on
the desktop for ease of use and minimal space requirements.
Advanced transport — the design eliminates glass guides, which
minimizes the possibility of film scratches.
Accurate retrieval — the scanner accurately retrieves the image
you want.
CAR capability — the PC for the scanner can be setup to accept
CAR (Computer-Aided Retrieval) commands by adding the optional
Kodak CAR Interface Software to the standard user interface
software. The CAR 278 Interface, CAR 278 Synchronous Interface
Unit or Hostlink for Micrographics by eiStream Kofile may be required
for interfacing with the mainframe computer system. Check with
your CAR integrator for details.
A-61404 February 2003