Automatic Gearbox; Introductory Information - Skoda Octavia Owner's Manual

Hide thumbs Also See for Octavia:
Table of Contents

Advertisement

Automatic gearbox

Automatic gearbox
ä
Introduction
This chapter contains information on the following subjects:
WARNING
Do not depress the accelerator if changing the position of the selector lever
when the vehicle is stationary and the engine is running - risk of accident!
Never move the selector lever into position R or P when driving - risk of an
accident!
When the engine is running and the vehicle is stationary, it is necessary to
hold the car with the brake pedal in all the positions of the selector lever (ex-
cept P and N) since the power transmission is never completely interrupted,
also not when the engine is idling - the vehicle creeps.
The selector lever must be placed into position P and the handbrake firmly
applied before the bonnet can be opened and work on the running engine can
be completed - risk of accident! The safety guidelines must always be ob-
served
» page
164, Engine compartment.
1)
Applies to DSG.
108
Using the system
WARNING (Continued)
If stopping on a hill (downhill gradient), never try to maintain the vehicle sta-
tionary with the gear engaged by means of the "accelerator pedal", i.e. by let-
ting the clutch slip. This can lead to overheating of the clutch. If there is a risk
of overheating of the clutch due to overload, the clutch is opened automati-
cally and the vehicle rolls backward - risk of accident!
If you have to stop on a slope, depress and hold the brake pedal to prevent
the vehicle from rolling back.
On a smooth or slippery road surface using the kickdown function can cause
108
the driven wheels to spin - risk of skidding!
109
109
CAUTION
110
The double clutch on the automatic gearbox DSG is equipped with an overload
111
protection. If the uphill function is used when the vehicle is stationary or driving
111
slowly uphill, the thermal stress on the clutches is increased.
111
In the event that they overheat, the symbol
112
play with the warning text
112
the engine and wait until the symbol and warning go out - risk of damaging the
gearbox! The journey can be continued as soon as the symbol and the warning go
out.

Introductory information

ä
First read and observe the introductory information and safety warn-
ings
on page 108.
Shifting up and down through the gears is performed automatically. However, the
gearbox can also be switched into Tiptronic mode. This mode makes it possible
for you to also shift gears manually
The engine can only be started when the selector lever is in position P or N . If
the selector lever is not in the P or N positions when locking the steering, switch-
ing the ignition on or off or when leaving the engine on, the following message
will appear in the Information display Move selector lever to position P/N! or, in
the instrument cluster display:  P/N.
At temperatures below -10 °C the engine can only be started in the selector lever
position P
.
1)
appears in the information dis-
» page
30. In such a case, stop the vehicle, switch off
» page
110.
£

Advertisement

Table of Contents
loading

Table of Contents