Manually adjusting the front seats
ä
First read and observe the introductory information and safety warn-
ings
on page 59.
Adjusting a seat in a forward/back direction
›
Pull the lever
» Fig. 40
up and push the seat into the desired position.
1
›
Release the lever
and push the seat until the lock clicks into place.
1
Adjusting height of seat
›
To lift the seat, pull or pump the lever
›
To lower the seat, push or pump the lever
Adjust the angle of the seat backrest
›
To adjust the angle of the backrest, relieve any pressure from the seat backrest
(do not lean on it) and turn the handwheel
Adjusting lumbar support
›
Turn the hand wheel
» Fig. 40
4
lumbar support is achieved.
60
Using the system
Fig. 40
Control elements at the seat
» Fig. 40
upwards.
2
downwards.
2
» Fig.
40.
3
until the most comfortable curvature of the
Adjusting front seats electrically
Fig. 41 Controls for the electric seat adjustment
ä
First read and observe the introductory information and safety warn-
ings
on page 59.
Adopt the correct seated position before setting
Adjusting a seat in a forward/back direction
›
Press the switch
» Fig. 41
A
Set the height of the seat cushion
›
Press the switch
upwards or downwards.
A
Adjust the angle of the seat cushion
›
Press the switch
in the direction of arrow 2 or 3. 3.
A
Adjust the angle of the seat backrest
›
Press the switch
in the direction of the desired setting.
B
Reducing or increasing the curvature of the lumbar support
›
Press the switch
forwards or backwards.
C
Raising or lowering the curvature of the lumbar support
›
Press the switch
upwards or downwards.
C
Note
If the movement of the seat is inadvertently interrupted during an adjustment,
once again press the switch in the appropriate direction and complete the adjust-
ment of the seat.
» page
59, Front seats.
forwards or backwards in the direction of arrow 1.