Filling the CD changer with CDs
›
Press and hold the button
» Fig. 109
C
CDs one after the other (maximum 6 CDs) into the CD case
lights in the buttons
stop flashing.
D
Inserting a CD at a specific position
›
Press the button
» Fig.
109. The indicator lights in the buttons
C
the memory spaces that are already assigned and flash in the case of free mem-
ory spaces.
›
Touch the desired button
and guide the CD into the CD-case
D
Ejecting a CD
›
Press the button
» Fig. 109
to eject a CD. For assigned memory spaces, the
A
indicator lights now illuminate in the buttons
›
Press the corresponding button
Ejecting all CDs
›
Press and hold the button
» Fig. 109
A
CDs. All CDs in the CD-changer are ejected consecutively.
Note
Always guide the CD into the CD case
■
upwards.
Never force the CD into the CD case as it is drawn in automatically.
■
After loading a CD into the CD changer, wait until the indicator light of the cor-
■
responding button
is illuminated. Then the CD case
D
CD.
If a position is selected, on which a CD is already located, this CD is ejected. Re-
■
move the ejected CD and load the desired CD.
126
Using the system
for longer than 2 seconds and guide the
. The indicator
B
D
.
B
.
D
. The CD is ejected.
D
for more than 2 seconds to eject the
» Fig. 109
with the printed side facing
B
is free to load the next
B
illuminate